SG-A92G-Ex explosion-proof fire sound and light alarm / Fire CCCF certification / IP66 / explosion-proof sound and light alarm for energy storage battery compartment
Contact Info
- Add:No. 47 Qiankeng Road, Fucheng Street, Longhua District, Shenzhen, Zip: 518000
- Contact: 陈诚
- Tel:0158-89370119
- Email:2315426052@qq.com
Other Products
SG-A92G-ExExplosion-proof Fire Sound and Light Alarm / Fire CCCF Certification / IP66 / Explosion-proof Sound and Light Alarm for Energy Storage Battery Cabin
I. Product Overview:
1.1 The SG-A92G-Ex type fire sound and light alarm (hereinafter referred to as the sound and light alarm; unless otherwise specified, it is defaulted to an intelligent type, and can also be set as a general non-coded type) is a product supporting the bus-type fire alarm controller produced by our company. The sound and light alarm adopts microprocessor control, can communicate with the controller in real time, and receive control commands issued by the controller. When an accident occurs, the sound and light alarm activates after receiving the start command from the controller, emitting a dazzling flash signal and a sharp sound alarm signal. Press the "Reset" key on the controller to restore the sound and light alarm to the monitoring state.
1.2 This product complies with relevant standards such as GB/T 3836.1 "Explosive Atmospheres - Part 1: Equipment General Requirements", GB/T 3836.2 "Explosive Atmospheres - Part 2: Equipment Protected by Flameproof Enclosure "d"", and GB/T 3836.31-2021 "Explosive Atmospheres - Part 31: Equipment Protected by Dust-Ignition-Proof Enclosure "t"". The explosion-proof mark of the sound and light alarm is Ex db ⅡC T6 Gb/Ex tb ⅢC T80℃ Db, which is suitable for use in hazardous areas Zone 1, Zone 2, Zone 21 and Zone 22 containing explosive mixtures formed by Class Ⅱ A, B, C T1~T6 group combustible gases or dust and air.
II. Product Features:
2.1 The explosion-proof type is flameproof type.
2.2 Full electronic coding, address range 1~324.
2.3 Polarized two-bus connection, simple installation and maintenance.
2.4 The sound and light alarm working mode can be freely set via the encoder, which can be set to sound and light alarm simultaneously, or only sound alarm or only light alarm, adapting to different working environments.
2.5 This product can also be set as a common type of sound and light alarm without an address via the encoder.
III. Product Technical Parameters:
3.1 Implementation Standards: GB 26851-2011, GB/T 3836.1-2021, GB/T 3836.2-2021, GB/T 3836.31-2021
3.2 Explosion-proof Mark: Ex db IIC T6 Gb/Ex tb ⅢC T80℃ Db
3.3 Applicable Explosive Atmosphere: Hazardous areas Zone 1, Zone 2, Zone 21 and Zone 22 containing explosive mixtures formed by Class Ⅱ A, B, C T1~T6 group combustible gases or dust and air
3.4 Working Mode: Non-polar two-bus / DC24V (non-coded)
3.5 Tone Change Period: 3.5s～5.0s
3.6 Flash Frequency: 1.0Hz～1.5Hz
3.7 Working Current: ＜1mA (monitoring state)
3.8 Working Voltage: Bus 24V
3.9 Alarm State: ≤14mA (alarm state)
3.10 Alarm Volume: 70dB～100dB
3.11 Working Environment: Temperature: -40℃～70℃, Relative Humidity ≤95% (40℃±2℃, no condensation)
3.12 Protection Grade: IP66
3.13 Weight: Approx. 1.6kg
3.14 Electrical Interface: 2-M20*1.5
All product certifications are complete, welcome to call for consultation. www.szhsj119.com
Shenzhen Hongsheng Gaoke Electronics Co., Ltd.
Contact Person: Mr. Chen Cheng
Phone: 【15889370119】 (WeChat same number)
| Industry Category | Electrical Equipment & Supplies/Batteries/Rechargeable Batteries |
|---|---|
| Product Category | |
| Brand: | 宏盛佳 |
| Spec: | SG-A92G-Ex |
| Stock: | 1000000 |
| Manufacturer: | 深圳市宏盛高科电子有限公司 |
| Origin: | 114403 |
